Chambering

Below are the cartridges that I presently have chambering reamers available. If you are interested in a cartridge that I don't list and it is a standard factory cartridge (Redding Series A or B and not tight necked) that I feel can be added to my inventory, give me a call (806-826-5618 ) or e-mail me and I will add it on receipt of your action to be rebarreled at no extra cost to you.

If you want a chambering that I don't list, I will be glad to order the reamer and go gage (if necessary) for you at your expense. The reamer and/or go gage will be sent to you upon completion of the project. I can no longer justify splitting the cost of a reamer with a customer unless its for a cartridge that I will reuse the reamer a number of times. Too many times when I've split the reamer cost, that one time is the only time that the reamer was used. If you want a chambering that I don't list, contact me as it's very possible that I have it, but have never added it to this list of reamers.

I will chamber for practically any wildcat with your reamer and go headspace gage. I prefer to use removable pilot reamers made by Pacific Precision, Dave Manson, Hugh Henriksen or JGS, as this allows me to fit the bushing size to the barrel and allows for a better chambering job. All of my reamers are removable pilot reamers.

I've added the short magnums that I chamber back to my list of available reamers. I had removed them because of the patent law suit against Winchester several years back. It's pretty easy to prove that the patent is invalid as there have been previous short magnum cartridges. For instance, the 7mm Wade Super Seven shown on page 396 of the P. O. Ackley "Handbook for Shooters and Reloaders" is almost identical to the 7mm WSM with just a slightly longer neck. In the photo, the 7mm Wade is on the left, 7 WSM center and .300 WSM on the right. The 7mm Wade Super Seven was built originally by Fred Wade of Phoenix, AZ back in the 50's and 60's based on the .348 Winchester case with the rim turned to make it a rimless short magnum. The diameters of the 7mm Wade and the 7mm WSM are within a few thousandths in diameter at the web of the case.

Match and Tight Necked Varmint Reamers

I also have a .275" (6mm) neck+ throat reamer, a .296" (6.5mm) neck + throat reamer and a .316" (7mm) neck+ throat reamer that can be used with any 6mm, 6.5mm or 7mm tight necked reamer to make it into a semi-tight neck (slightly tighter than Sammi minimum).

Standard Necked Reamers

Lazzaroni Cartridges

7.21 (7mm) Tomahawk

7.82 (.308) Patriot

7.82 (.308) Warbird

8.59 (.338") Titan

Coming soon

Our complete price list is available.

If you have any questions, please contact me: mike@bryantcustom.com.

.:. Top