 |
 |
 |
| Stolle Panda pillar bedded into a McMillan
MBR stock. Hart barrel chambered for 6 BR .265 Neck. Jewell trigger. |
Remington 700 pillar Bedded into McMillan Edge
Stock. Hart 16 twist barrel chambered for .30 BR .330 Neck. |
Remington 40XBR Switch barrel rig with Hart barrels
in .22 Dasher, .22-243, 6/284 and 6.5/284. Pillar bedded into Shehane
Tracker stock. 6.5 barrel has a Bryant brake. |
 |
 |
 |
| Remington 40XBR 40XBR action has been
trued and the loading port opened up for use with the .300 Wtby Ackley
Improved. Hart 30" barrel, blocked in a Shehane barrel block
and Shehane Maxi-tracker stock. Jewell BR trigger. Nightforce 12x42
scope. Stainless rails were made and bolted to the bottom of the stock,
front and rear. |
XP-100 Action has been trued,
with original trigger and recoil lug used. Barrel was turned down
from a blank, fluted and chambered in 6BR .265 neck by Bryant Custom.
Barrel drilled and tapped for front sight. Mel did his own stocking. |
Remington 788
Action has been trued with the lugs lapped. Action has been NP3
coated by Robar. Dovetail base milled on top of action for Kelbly
rings. Canjar trigger installed. Hart barrel chambered in .22 PPC
.246 Neck. McMillan hunter class stock in 60% black, 20% tan and
20% olive marble. |
 |
 |
 |
| Nesika J Rifle is built on a Nesika
model J right bolt right port with ejector. The action is glued into
a Borden benchrest stock. The Krieger barrel is chambered for the
6 PPC .262" Neck and its topped off with a Leupold 36XBR-D scope
in Kelbly rings. The excellent paint job was re-done in 2003 by Michael
Kavanaugh. |
Farley Rifle is built on a Farley right bolt
right port action with ejector. The action is glued into a Borden
benchrest stock. The 14 twist Lilja barrel is chambered for the
6 PPC .262" neck. It has a silver Weaver 36X scope in Farley
rings. The Tiger Tear paint job was done by Michael
Kavanaugh.
|
Shilen Sleeved 40XBR
Action is glued into a McMillan Edge stock. The Shilen select match
17 twist barrel is chambered for the .30 BR .330 Neck. |
 |
 |
 |
Remington 700 pillar bedded into
McMillan silhouette stock. Bryant Custom muzzle brake. Action has
been trued, Sako extractor installed, ADL action NP3 coated by Robar,
Inc. Hart double taper silhouette barrel chambered to 7mm BR.
|
Remington 700 action has been completely trued,
Hart barrel is chambered for the 6.5/284 .290 neck. Pillar bedded
into a Holland HV stock. Bryant Custom muzzle brake. Barreled action
has been black matte teflon coated. Tapered bases for Kelbly rings
milled in place on top of action. |
Remington 700 action has been completely trued,
Shilen S/M #16 silhouette barrel is chambered for the .260 Remington.
Pillar bedded into a McMillan Anchutz silhouette stock. Tapered
bases for Kelbly rings milled in place on top of action. Scope is
a Leupold 6.5-20 Vari X III. |
 |
 |
 |
Stolle Panda Shilen S/M barrel chambered in
6 PPC .262 Neck. Right bolt right port action has been glued into
a Kelbly stock. Ebony buttplate. "Patriot" paint job was
applied by Michael Kavanaugh.
|
Bat 8.5, Hart 1.450" x 28.5" barrel
chambered for the 7.82 Patriot (Lazzeroni short magnum). Shehane
barrel block has been pillar bedded to the original Shehane Maxi
Tracker stock. |
Remington 700, .25-06 in a Lilja #7 contour 10
twist stainless barrel. Bedded to H-S Precision stock. 6-24X Weaver
scope. Metal is Gun Kote Earth. |
 |
 |
 |
Rem. 700 Mike Rock barrel chambered in .308
Winchester. Trued action is pillar bedded to a McMillan M40A1 stock
in forest camo, freefloated barrel. Leupold 3.5-10x50 Vari-X III
scope sits on top of Ken Farrell bases in Leupold rings. Williams
steel floorplate, Shilen hunting trigger. |
Sako 75 Lilja fluted barrel chamber to .257
Ackley. Action pillar bedded to McMillan Sako stock in dark green
with white marble. |
Borden Timberline Benchmark fluted barrel is chambered
in 7 mm Rem. Mag. The action is pillar bedded to a McMillan HTG stock.
H-S Precision detachable magazine. All metal work is Cerakoted. |
